Mapping Study of Design Thinking on Product Development in The Last 10 Years

https://doi.org/10.35912/rambis.v3i2.2402
Published: Dec 4, 2023

Abstract:

Purpose: The availability of literature regarding design thinking concerning product development in recent years has not been able to be synthesized. So, this article is expected to be able to provide the development of a conceptual framework that can categorize how design thinking contributes to product development and provides a mapping presentation to visualize how research in the field of design thinking studies on product development has developed in the last 10 years.

Methodology/approach: A systematic analysis was carried out on articles published in the last 10 years.

Results/findings: Produce a conceptual frameworj that provides a typology to discuss the development of how design thinking contributes to the product development ecosystem and directs research for the future.

Limitations: This article has limitations, first regarding evidence from articles that provide different perspectives and also topic of discussion. Second, the result obtained from the literature review are greatly influenced by use of keywords. Third, this study did not carry out an analysis related to the impact of the article through citation analysis.

Contribution: This study responds to the increasing interest in design thinking and the rapid growth in the proliferation of studies by providing a review of design thinking and its relation to product development that has occurred over the last 10 years.

Keywords: design thinking, product development, mapping study

Keywords:
1. design thinking
2. product development
3. mapping study
Authors:
1 . Ajeng Putri Hanifah
2 . Iwan Sukoco
3 . Anang Muftiadi
View PDF
How to Cite
Hanifah, A. P., Iwan Sukoco, & Anang Muftiadi. (2023). Mapping Study of Design Thinking on Product Development in The Last 10 Years. Reviu Akuntansi, Manajemen, Dan Bisnis, 3(2), 93–109. https://doi.org/10.35912/rambis.v3i2.2402
Download Citation
  1. Endnote/Zotero/Mendeley (RIS)
  2. BibTeX

Downloads

Download data is not yet available.
Issue & Section
Vol. 3 No. 2 (2023): Desember
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

References

    Aç?kgöz, A., Demirkan, I., Latham, G. P., & Kuzey, C. (2021). The relationship between unlearning and innovation ambidexterity with the performance of new product development teams. Group Decision and Negotiation, 30(4), 945-982.

    Ali, B. J., & Anwar, G. (2021). Marketing Strategy: Pricing strategies and its influence on consumer purchasing decision. Ali, BJ, & Anwar, G.(2021). Marketing Strategy: Pricing strategies and its influence on consumer purchasing decision. International journal of Rural Development, Environment and Health Research, 5(2), 26-39.

    Aminoff, A., & Sundqvist-Andberg, H. (2021). Constraints leading to system-level lock-ins—the case of electronic waste management in the circular economy. Journal of cleaner production, 322, 129029.

    Andreassen, T. W., Kristensson, P., Lervik-Olsen, L., Parasuraman, A., McColl-Kennedy, J. R., Edvardsson, B., & Colurcio, M. (2016). Linking service design to value creation and service research. Journal of Service Management, 27(1), 21-29.

    Ar?k, M., & Topçu, M. S. (2020). Implementation of engineering design process in the K-12 science classrooms: Trends and issues. Research in Science Education, 1-23.

    Auernhammer, J., & Roth, B. (2021). The origin and evolution of Stanford University’s design thinking: From product design to design thinking in innovation management. Journal of Product innovation management, 38(6), 623-644.

    Baker III, F. W., & Moukhliss, S. (2020). Concretising design thinking: A content analysis of systematic and extended literature reviews on design thinking and human?centred design. Review of Education, 8(1), 305-333.

    Bak?rl?o?lu, Y., & McMahon, M. (2021). Co-learning for sustainable design: The case of a circular design collaborative project in Ireland. Journal of cleaner production, 279, 123474.

    Baldassarre, B., Keskin, D., Diehl, J. C., Bocken, N., & Calabretta, G. (2020). Implementing sustainable design theory in business practice: A call to action. Journal of cleaner production, 273, 123113.

    Barata, J., Miguel, R., & Azevedo, S. (2018). Creativity and industrial fashion design—reviews, analyses and connexions. Paper presented at the Reverse Design: A Current Scientific Vision From the International Fashion and Design Congress.

    Björklund, T., Maula, H., Soule, S. A., & Maula, J. (2020). Integrating design into organizations: The coevolution of design capabilities. California management review, 62(2), 100-124.

    Bongiovanni, I., & Louis, C. P. (2021). Theory and practice of Design Thinking: perspectives of designers and business consultants. International Journal of Design Creativity and Innovation, 9(3), 174-191.

    Booth, A., Sutton, A., Martyn-St James, M., & Clowes, M. (2021). Systematic Approaches to a Successful Literature Review (A. Booth, Ed: SAGE.

    Braun, V., & Clarke, V. (2019). Reflecting on reflexive thematic analysis. Qualitative research in sport, exercise and health, 11(4), 589-597.

    Buhl, A., Schmidt-Keilich, M., Muster, V., Blazejewski, S., Schrader, U., Harrach, C., . . . Süßbauer, E. (2019). Design thinking for sustainability: Why and how design thinking can foster sustainability-oriented innovation development. Journal of cleaner production, 231, 1248-1257.

    Calabrese, A., Castaldi, C., Forte, G., & Levialdi, N. G. (2018). Sustainability-oriented service innovation: An emerging research field. Journal of cleaner production, 193, 533-548.

    Canto Primo, M., Gil-Saura, I., & Frasquet-Deltoro, M. (2021). The role of marketing and product design in driving firm’s performance. Journal of Product & Brand Management, 30(2), 231-243.

    Carlgren, L., Rauth, I., & Elmquist, M. (2016). Framing design thinking: The concept in idea and enactment. Creativity and innovation management, 25(1), 38-57.

    Centobelli, P., Cerchione, R., Chiaroni, D., Del Vecchio, P., & Urbinati, A. (2020). Designing business models in circular economy: A systematic literature review and research agenda. Business Strategy and the Environment, 29(4), 1734-1749.

    Chouki, M., de Mozota, B. B., Kallmuenzer, A., Kraus, S., & Dabic, M. (2021). Design thinking and agility in digital production: the key role of user experience design. IEEE Transactions on Engineering Management.

    de Paula, D., Cormican, K., & Dobrigkeit, F. (2021). From Acquaintances to Partners in Innovation: An Analysis of 20 Years of Design Thinking's Contribution to New Product Development. IEEE Transactions on Engineering Management, 69(4), 1664-1677.

    de Paula, D., Marx, C., Wolf, E., Dremel, C., Cormican, K., & Uebernickel, F. (2023). A managerial mental model to drive innovation in the context of digital transformation. Industry and Innovation, 30(1), 42-66.

    Dell'Era, C., Magistretti, S., Cautela, C., Verganti, R., & Zurlo, F. (2020). Four kinds of design thinking: From ideating to making, engaging, and criticizing. Creativity and innovation management, 29(2), 324-344.

    Di Vaio, A., Hassan, R., D’Amore, G., & Tiscini, R. (2022). Responsible innovation and ethical corporate behavior in the Asian fashion industry: A systematic literature review and avenues ahead. Asia Pacific Journal of Management, 1-45.

    Eddington, S. M., Corple, D., Buzzanell, P. M., Zoltowski, C., & Brightman, A. (2020). Addressing organizational cultural conflicts in engineering with design thinking. Negotiation and Conflict Management Research, 13(3), 263-284.

    Elsbach, K. D., & Stigliani, I. (2018). Design thinking and organizational culture: A review and framework for future research. Journal of management, 44(6), 2274-2306.

    Gerardou, F. S., Meriton, R., Brown, A., Moran, B. V. G., & Bhandal, R. (2022). Advancing a design thinking approach to challenge-based learning The Emerald Handbook of Challenge Based Learning (pp. 93-129): Emerald Publishing Limited.

    Gheitarani, F., Nawaser, K., Hanifah, H., & Vafaei-Zadeh, A. (2023). Human-behavioural micro-foundations of dynamic capabilities: a systematic review of the last two decades of research. International Journal of Management and Decision Making, 22(1), 1-26.

    Gliedt, T., Hoicka, C. E., & Jackson, N. (2018). Innovation intermediaries accelerating environmental sustainability transitions. Journal of cleaner production, 174, 1247-1261.

    Govindan, K., Shaw, M., & Majumdar, A. (2021). Social sustainability tensions in multi-tier supply chain: A systematic literature review towards conceptual framework development. Journal of cleaner production, 279, 123075.

    Granato, G., Fischer, A. R., & van Trijp, H. C. (2022). Misalignments between users and designers as source of inspiration: A novel hybrid method for physical new product development. Technovation, 111, 102391.

    Hao, Z., Liu, C., & Goh, M. (2021). Determining the effects of lean production and servitization of manufacturing on sustainable performance. Sustainable Production and Consumption, 25, 374-389.

    Huang, J., Tao, Y., Shi, M., & Wu, J. (2022). Empirical Study on Design Trend of Taiwan (1960s–2020): The Evolution of Theme, Diversity and Sustainability. Sustainability, 14(19), 12578.

    Hull, C. E., Millette, S., & Williams, E. (2021). Challenges and opportunities in building circular-economy incubators: Stakeholder perspectives in Trinidad and Tobago. Journal of cleaner production, 296, 126412.

    Hung, Y.-H., & Liao, D.-W. (2022). Product Innovation Through A3 Problem-Solving: Improving the Design of a Commercial Beverage Dispenser. Paper presented at the International Conference on Human-Computer Interaction.

    Idris, M.-C., & Durmu?o?lu, A. (2021). Innovation management systems and standards: A systematic literature review and guidance for future research. Sustainability, 13(15), 8151.

    Jaskyte, K., & Liedtka, J. (2022). Design thinking for innovation: Practices and intermediate outcomes. Nonprofit Management and Leadership, 32(4), 555-575.

    Kamal, M. M., Sivarajah, U., Bigdeli, A. Z., Missi, F., & Koliousis, Y. (2020). Servitization implementation in the manufacturing organisations: Classification of strategies, definitions, benefits and challenges. International Journal of Information Management, 55, 102206.

    Kent, L., Snider, C., Gopsill, J., & Hicks, B. (2021). Mixed reality in design prototyping: A systematic review. Design Studies, 77, 101046.

    Knight, E., Daymond, J., & Paroutis, S. (2020). Design-led strategy: how to bring design thinking into the art of strategic management. California management review, 62(2), 30-52.

    Komatsu, T., Salgado, M., Deserti, A., & Rizzo, F. (2021). Policy labs challenges in the public sector: the value of design for more responsive organizations. Policy design and practice, 4(2), 271-291.

    Konings, M. (2018). Capital and time: For a new critique of neoliberal reason: Stanford University Press.

    Kujala, I., Nyström, A.-G., Wendelin, C., & Brännback, M. (2022). Action-Based Learning Platform for Entrepreneurship Education—Case NÅA Business Center. Entrepreneurship Education and Pedagogy, 5(4), 576-598.

    Lages, L. F. (2022). Innovation, commercialization, and sustainability of earth observation in space business: Tensions and paradoxes. Paper presented at the Advances in Digital Marketing and eCommerce: Third International Conference, 2022.

    Lahiri, A., Cormican, K., & Sampaio, S. (2021). Design thinking: From products to projects. Procedia computer science, 181, 141-148.

    Lahti, H., Kangas, K., Härkki, T., & Seitamaa-Hakkarainen, P. (2022). Challenging creativity constraints: Three design studios in craft teacher education. Techne serien-Forskning i slöjdpedagogik och slöjdvetenskap, 29(1), 1-12.

    Laptev, G., & Shaytan, D. (2022). Co-design-based learning for entrepreneurs in the digital age. Measuring Business Excellence, 26(1), 93-105.

    Lauff, C. A., Knight, D., Kotys-Schwartz, D., & Rentschler, M. E. (2020). The role of prototypes in communication between stakeholders. Design Studies, 66, 1-34.

    Lawson, B. (2006). How designers think: The design process demystified: Routledge.

    Leon, R.-D. (2021). Intellectual capital and the coronavirus crisis: taking a closer look at restaurants’ strategies. Knowledge Management Research & Practice, 19(4), 501-509.

    Li, W., Bhutto, T. A., Xuhui, W., Maitlo, Q., Zafar, A. U., & Bhutto, N. A. (2020). Unlocking employees’ green creativity: The effects of green transformational leadership, green intrinsic, and extrinsic motivation. Journal of cleaner production, 255, 120229.

    Lichtenthaler, U. (2020). A conceptual framework for combining agile and structured innovation processes. Research-Technology Management, 63(5), 42-48.

    Liu, S. X., Liu, H., & Zhang, Y. (2018). The new role of design in innovation: A policy perspective from China. The Design Journal, 21(1), 37-58.

    Loderer, M., & Kock, A. (2021). The influence of design thinking on open innovation. International Journal of Innovation Management, 25(10), 2140001.

    Lundberg, H., & Öberg, C. (2021). Teachers, researchers, but not innovators? Rethinking university-industry collaboration. Journal of Business & Industrial Marketing, 36(13), 161-173.

    Lybæk, R., Christensen, T. B., & Thomsen, T. P. (2021). Enhancing policies for deployment of Industrial symbiosis–What are the obstacles, drivers and future way forward? Journal of cleaner production, 280, 124351.

    Lyu, C., Zhang, F., Ji, J., Teo, T. S., Wang, T., & Liu, Z. (2022). Competitive intensity and new product development outcomes: The roles of knowledge integration and organizational unlearning. Journal of Business Research, 139, 121-133.

    Magistretti, S., Ardito, L., & Messeni Petruzzelli, A. (2021). Framing the microfoundations of design thinking as a dynamic capability for innovation: Reconciling theory and practice. Journal of Product innovation management, 38(6), 645-667.

    Magistretti, S., Bianchi, M., Calabretta, G., Candi, M., Dell’Era, C., Stigliani, I., & Verganti, R. (2022). Framing the multifaceted nature of design thinking in addressing different innovation purposes. Long range planning, 55(5), 102163.

    Manna, V., Rombach, M., Dean, D., & Rennie, H. G. (2022). A design thinking approach to teaching sustainability. Journal of Marketing Education, 44(3), 362-374.

    Mansur, M., & Djaelani, A. K. (2023). Business Strategy Approach to Informal Small Businesses in Increasing Productivity and Competitiveness. Golden Ratio of Marketing and Applied Psychology of Business, 3(1), 01-19.

    Manzke, J. (2022). Competitive advantage and business sustainability through design thinking within manufacturing SMEs: an integrative literature review. International Journal of Competitiveness, 2(3), 248-265.

    Marx, C. (2022). Design Thinking for Digital Transformation: Reconciling Theory and Practice Design Thinking Research: Achieving Real Innovation (pp. 57-77): Springer.

    McNally, J. J., Piperopoulos, P., Welsh, D. H., Mengel, T., Tantawy, M., & Papageorgiadis, N. (2020). From pedagogy to andragogy: Assessing the impact of social entrepreneurship course syllabi on the Millennial learner. Journal of small business management, 58(5), 871-892.

    Meinel, M., Eismann, T. T., Baccarella, C. V., Fixson, S. K., & Voigt, K.-I. (2020). Does applying design thinking result in better new product concepts than a traditional innovation approach? An experimental comparison study. European Management Journal, 38(4), 661-671.

    Micheli, P., Wilner, S. J., Bhatti, S. H., Mura, M., & Beverland, M. B. (2019). Doing design thinking: Conceptual review, synthesis, and research agenda. Journal of Product innovation management, 36(2), 124-148.

    Mikalef, P., Pateli, A., & van de Wetering, R. (2021). IT architecture flexibility and IT governance decentralisation as drivers of IT-enabled dynamic capabilities and competitive performance: The moderating effect of the external environment. European Journal of Information Systems, 30(5), 512-540.

    Nagaraj, V., Berente, N., Lyytinen, K., & Gaskin, J. (2020). Team design thinking, product innovativeness, and the moderating role of problem unfamiliarity. Journal of Product innovation management, 37(4), 297-323.

    Nakata, C. (2020). Design thinking for innovation: Considering distinctions, fit, and use in firms. Business horizons, 63(6), 763-772.

    Nakata, C., & Hwang, J. (2020). Design thinking for innovation: Composition, consequence, and contingency. Journal of Business Research, 118, 117-128.

    Neri, A., Cagno, E., Lepri, M., & Trianni, A. (2021). A triple bottom line balanced set of key performance indicators to measure the sustainability performance of industrial supply chains. Sustainable Production and Consumption, 26, 648-691.

    Nguyen, A. H., Hoang, T. G., Nguyen, L. Q. T., & Thi Pham, H. M. (2022). Design thinking-based Data Analytic Lifecycle for improving management control in banks. Technology Analysis & Strategic Management, 1-16.

    Niesten, E., & Stefan, I. (2019). Embracing the paradox of interorganizational value co?creation–value capture: A literature review towards paradox resolution. International Journal of Management Reviews, 21(2), 231-255.

    Nowell, L. S., Norris, J. M., White, D. E., & Moules, N. J. (2017). Thematic analysis: Striving to meet the trustworthiness criteria. International journal of qualitative methods, 16(1), 1609406917733847.

    Nylund, P. A., Brem, A., & Agarwal, N. (2021). Innovation ecosystems for meeting sustainable development goals: The evolving roles of multinational enterprises. Journal of cleaner production, 281, 125329.

    Omwami, A., Lahti, H., & Seitamaa-Hakkarainen, P. (2020). The variation of the idea development process in apparel design: a multiple case study. International Journal of Fashion Design, Technology and Education, 13(3), 341-351.

    Ordieres-Meré, J., Prieto Remon, T., & Rubio, J. (2020). Digitalization: An opportunity for contributing to sustainability from knowledge creation. Sustainability, 12(4), 1460.

    Parizi, R., Prestes, M., Marczak, S., & Conte, T. (2022). How has design thinking being used and integrated into software development activities? A systematic mapping. Journal of Systems and Software, 187, 111217.

    Petersen, K., Vakkalanka, S., & Kuzniarz, L. (2015). Guidelines for conducting systematic mapping studies in software engineering: An update. Information and software technology, 64, 1-18.

    Qiu, X., Cano-Kollmann, M., & Mudambi, R. (2022). Generating tacit knowledge across borders: international collaboration and design innovation in Norway. Industry and Innovation, 29(5), 597-622.

    Randhawa, K., Nikolova, N., Ahuja, S., & Schweitzer, J. (2021). Design thinking implementation for innovation: An organization's journey to ambidexterity. Journal of Product innovation management, 38(6), 668-700.

    Ravanello, I., Wolff, F., & Capra, A. (2017). Design Absorption And Learning Processes: a study on designers’ perceptions about companies. The Design Journal, 20(sup1), S2616-S2624.

    Robbins, P., & Fu, N. (2022). Blind faith or hard evidence? Exploring the indirect performance impact of design thinking practices in R&D. R&D Management, 52(4), 704-719.

    Roth, K., Globocnik, D., Rau, C., & Neyer, A. K. (2020). Living up to the expectations: The effect of design thinking on project success. Creativity and innovation management, 29(4), 667-684.

    Rudke, C. R. M., Zielinski, A. A. F., & Ferreira, S. R. S. (2023). From biorefinery to food product design: Peach (Prunus persica) by-products deserve attention. Food and Bioprocess Technology, 16(6), 1197-1215.

    Rylander Eklund, A., Navarro Aguiar, U., & Amacker, A. (2022). Design thinking as sensemaking: Developing a pragmatist theory of practice to (re) introduce sensibility. Journal of Product innovation management, 39(1), 24-43.

    Sameti, A., Koslow, S., & Mashhady, A. (2022). Are product design researchers and practitioners on the same page? The way professional product designers view creative design. Journal of Product & Brand Management, 31(6), 951-970.

    Seidel, V. P., Marion, T. J., & Fixson, S. K. (2020). Innovating how to learn design thinking, making, and innovation: Incorporating multiple modes in teaching the innovation process. INFORMS Transactions on Education, 20(2), 73-84.

    Silva, D. S., Ghezzi, A., Aguiar, R. B. d., Cortimiglia, M. N., & ten Caten, C. S. (2020). Lean Startup, Agile Methodologies and Customer Development for business model innovation: A systematic review and research agenda. International Journal of Entrepreneurial Behavior & Research, 26(4), 595-628.

    Singh, V., & Thurman, A. (2019). How many ways can we define online learning? A systematic literature review of definitions of online learning (1988-2018). American Journal of Distance Education, 33(4), 289-306.

    Stickdorn, M., Hormess, M. E., Lawrence, A., & Schneider, J. (2018). This is service design doing: applying service design thinking in the real world: " O'Reilly Media, Inc.".

    Suresh, V., & Kolluru, M. (2022). Pedagogy innovation for management graduates: application of design thinking. International Journal of Innovation Science, 14(3/4), 659-674.

    Trischler, J., Dietrich, T., & Rundle-Thiele, S. (2019). Co-design: from expert-to user-driven ideas in public service design. Public management review, 21(11), 1595-1619.

    Ünal, E., Urbinati, A., Chiaroni, D., & Manzini, R. (2019). Value Creation in Circular Business Models: The case of a US small medium enterprise in the building sector. Resources, conservation and recycling, 146, 291-307.

    Veflen, N., & Gonera, A. (2023). Perceived usefulness of design thinking activities for transforming research to impact. Food Control, 143, 109264.

    Velu, S. R. (2022). Design Thinking Approach for Increasing Innovative Action in Universities: ICT’s Mediating Effect. Sustainability, 15(1), 24.

    Yang, C., Zhang, L., & Wei, W. (2022). The influence of introducing the concept of sustainable system design thinking on consumer cognition: A designer’s perspective. Systems, 10(4), 85.

    Yang, M., Fu, M., & Zhang, Z. (2021). The adoption of digital technologies in supply chains: Drivers, process and impact. Technological Forecasting and Social Change, 169, 120795.

    Zhang, F., Sun, S., Liu, C., & Chang, V. (2020). Consumer innovativeness, product innovation and smart toys. Electronic Commerce Research and Applications, 41, 100974.

    Zhang, J., Yu, Q., Zheng, F., Long, C., Lu, Z., & Duan, Z. (2016). Comparing keywords plus of WOS and author keywords: A case study of patient adherence research. Journal of the association for information science and technology, 67(4), 967-972.

    Zheng, L. J., Xiong, C., Chen, X., & Li, C.-S. (2021). Product innovation in entrepreneurial firms: How business model design influences disruptive and adoptive innovation. Technological Forecasting and Social Change, 170, 120894.

    Zidulka, A. (2016). Weaving Together Creative Problem-Solving and Design Thinking in an MBA Class. Designing Business and Management, 197-207.

    Zonta, T., Da Costa, C. A., da Rosa Righi, R., de Lima, M. J., da Trindade, E. S., & Li, G. P. (2020). Predictive maintenance in the Industry 4.0: A systematic literature review. Computers & Industrial Engineering, 150, 106889.

  1. Aç?kgöz, A., Demirkan, I., Latham, G. P., & Kuzey, C. (2021). The relationship between unlearning and innovation ambidexterity with the performance of new product development teams. Group Decision and Negotiation, 30(4), 945-982.
  2. Ali, B. J., & Anwar, G. (2021). Marketing Strategy: Pricing strategies and its influence on consumer purchasing decision. Ali, BJ, & Anwar, G.(2021). Marketing Strategy: Pricing strategies and its influence on consumer purchasing decision. International journal of Rural Development, Environment and Health Research, 5(2), 26-39.
  3. Aminoff, A., & Sundqvist-Andberg, H. (2021). Constraints leading to system-level lock-ins—the case of electronic waste management in the circular economy. Journal of cleaner production, 322, 129029.
  4. Andreassen, T. W., Kristensson, P., Lervik-Olsen, L., Parasuraman, A., McColl-Kennedy, J. R., Edvardsson, B., & Colurcio, M. (2016). Linking service design to value creation and service research. Journal of Service Management, 27(1), 21-29.
  5. Ar?k, M., & Topçu, M. S. (2020). Implementation of engineering design process in the K-12 science classrooms: Trends and issues. Research in Science Education, 1-23.
  6. Auernhammer, J., & Roth, B. (2021). The origin and evolution of Stanford University’s design thinking: From product design to design thinking in innovation management. Journal of Product innovation management, 38(6), 623-644.
  7. Baker III, F. W., & Moukhliss, S. (2020). Concretising design thinking: A content analysis of systematic and extended literature reviews on design thinking and human?centred design. Review of Education, 8(1), 305-333.
  8. Bak?rl?o?lu, Y., & McMahon, M. (2021). Co-learning for sustainable design: The case of a circular design collaborative project in Ireland. Journal of cleaner production, 279, 123474.
  9. Baldassarre, B., Keskin, D., Diehl, J. C., Bocken, N., & Calabretta, G. (2020). Implementing sustainable design theory in business practice: A call to action. Journal of cleaner production, 273, 123113.
  10. Barata, J., Miguel, R., & Azevedo, S. (2018). Creativity and industrial fashion design—reviews, analyses and connexions. Paper presented at the Reverse Design: A Current Scientific Vision From the International Fashion and Design Congress.
  11. Björklund, T., Maula, H., Soule, S. A., & Maula, J. (2020). Integrating design into organizations: The coevolution of design capabilities. California management review, 62(2), 100-124.
  12. Bongiovanni, I., & Louis, C. P. (2021). Theory and practice of Design Thinking: perspectives of designers and business consultants. International Journal of Design Creativity and Innovation, 9(3), 174-191.
  13. Booth, A., Sutton, A., Martyn-St James, M., & Clowes, M. (2021). Systematic Approaches to a Successful Literature Review (A. Booth, Ed: SAGE.
  14. Braun, V., & Clarke, V. (2019). Reflecting on reflexive thematic analysis. Qualitative research in sport, exercise and health, 11(4), 589-597.
  15. Buhl, A., Schmidt-Keilich, M., Muster, V., Blazejewski, S., Schrader, U., Harrach, C., . . . Süßbauer, E. (2019). Design thinking for sustainability: Why and how design thinking can foster sustainability-oriented innovation development. Journal of cleaner production, 231, 1248-1257.
  16. Calabrese, A., Castaldi, C., Forte, G., & Levialdi, N. G. (2018). Sustainability-oriented service innovation: An emerging research field. Journal of cleaner production, 193, 533-548.
  17. Canto Primo, M., Gil-Saura, I., & Frasquet-Deltoro, M. (2021). The role of marketing and product design in driving firm’s performance. Journal of Product & Brand Management, 30(2), 231-243.
  18. Carlgren, L., Rauth, I., & Elmquist, M. (2016). Framing design thinking: The concept in idea and enactment. Creativity and innovation management, 25(1), 38-57.
  19. Centobelli, P., Cerchione, R., Chiaroni, D., Del Vecchio, P., & Urbinati, A. (2020). Designing business models in circular economy: A systematic literature review and research agenda. Business Strategy and the Environment, 29(4), 1734-1749.
  20. Chouki, M., de Mozota, B. B., Kallmuenzer, A., Kraus, S., & Dabic, M. (2021). Design thinking and agility in digital production: the key role of user experience design. IEEE Transactions on Engineering Management.
  21. de Paula, D., Cormican, K., & Dobrigkeit, F. (2021). From Acquaintances to Partners in Innovation: An Analysis of 20 Years of Design Thinking's Contribution to New Product Development. IEEE Transactions on Engineering Management, 69(4), 1664-1677.
  22. de Paula, D., Marx, C., Wolf, E., Dremel, C., Cormican, K., & Uebernickel, F. (2023). A managerial mental model to drive innovation in the context of digital transformation. Industry and Innovation, 30(1), 42-66.
  23. Dell'Era, C., Magistretti, S., Cautela, C., Verganti, R., & Zurlo, F. (2020). Four kinds of design thinking: From ideating to making, engaging, and criticizing. Creativity and innovation management, 29(2), 324-344.
  24. Di Vaio, A., Hassan, R., D’Amore, G., & Tiscini, R. (2022). Responsible innovation and ethical corporate behavior in the Asian fashion industry: A systematic literature review and avenues ahead. Asia Pacific Journal of Management, 1-45.
  25. Eddington, S. M., Corple, D., Buzzanell, P. M., Zoltowski, C., & Brightman, A. (2020). Addressing organizational cultural conflicts in engineering with design thinking. Negotiation and Conflict Management Research, 13(3), 263-284.
  26. Elsbach, K. D., & Stigliani, I. (2018). Design thinking and organizational culture: A review and framework for future research. Journal of management, 44(6), 2274-2306.
  27. Gerardou, F. S., Meriton, R., Brown, A., Moran, B. V. G., & Bhandal, R. (2022). Advancing a design thinking approach to challenge-based learning The Emerald Handbook of Challenge Based Learning (pp. 93-129): Emerald Publishing Limited.
  28. Gheitarani, F., Nawaser, K., Hanifah, H., & Vafaei-Zadeh, A. (2023). Human-behavioural micro-foundations of dynamic capabilities: a systematic review of the last two decades of research. International Journal of Management and Decision Making, 22(1), 1-26.
  29. Gliedt, T., Hoicka, C. E., & Jackson, N. (2018). Innovation intermediaries accelerating environmental sustainability transitions. Journal of cleaner production, 174, 1247-1261.
  30. Govindan, K., Shaw, M., & Majumdar, A. (2021). Social sustainability tensions in multi-tier supply chain: A systematic literature review towards conceptual framework development. Journal of cleaner production, 279, 123075.
  31. Granato, G., Fischer, A. R., & van Trijp, H. C. (2022). Misalignments between users and designers as source of inspiration: A novel hybrid method for physical new product development. Technovation, 111, 102391.
  32. Hao, Z., Liu, C., & Goh, M. (2021). Determining the effects of lean production and servitization of manufacturing on sustainable performance. Sustainable Production and Consumption, 25, 374-389.
  33. Huang, J., Tao, Y., Shi, M., & Wu, J. (2022). Empirical Study on Design Trend of Taiwan (1960s–2020): The Evolution of Theme, Diversity and Sustainability. Sustainability, 14(19), 12578.
  34. Hull, C. E., Millette, S., & Williams, E. (2021). Challenges and opportunities in building circular-economy incubators: Stakeholder perspectives in Trinidad and Tobago. Journal of cleaner production, 296, 126412.
  35. Hung, Y.-H., & Liao, D.-W. (2022). Product Innovation Through A3 Problem-Solving: Improving the Design of a Commercial Beverage Dispenser. Paper presented at the International Conference on Human-Computer Interaction.
  36. Idris, M.-C., & Durmu?o?lu, A. (2021). Innovation management systems and standards: A systematic literature review and guidance for future research. Sustainability, 13(15), 8151.
  37. Jaskyte, K., & Liedtka, J. (2022). Design thinking for innovation: Practices and intermediate outcomes. Nonprofit Management and Leadership, 32(4), 555-575.
  38. Kamal, M. M., Sivarajah, U., Bigdeli, A. Z., Missi, F., & Koliousis, Y. (2020). Servitization implementation in the manufacturing organisations: Classification of strategies, definitions, benefits and challenges. International Journal of Information Management, 55, 102206.
  39. Kent, L., Snider, C., Gopsill, J., & Hicks, B. (2021). Mixed reality in design prototyping: A systematic review. Design Studies, 77, 101046.
  40. Knight, E., Daymond, J., & Paroutis, S. (2020). Design-led strategy: how to bring design thinking into the art of strategic management. California management review, 62(2), 30-52.
  41. Komatsu, T., Salgado, M., Deserti, A., & Rizzo, F. (2021). Policy labs challenges in the public sector: the value of design for more responsive organizations. Policy design and practice, 4(2), 271-291.
  42. Konings, M. (2018). Capital and time: For a new critique of neoliberal reason: Stanford University Press.
  43. Kujala, I., Nyström, A.-G., Wendelin, C., & Brännback, M. (2022). Action-Based Learning Platform for Entrepreneurship Education—Case NÅA Business Center. Entrepreneurship Education and Pedagogy, 5(4), 576-598.
  44. Lages, L. F. (2022). Innovation, commercialization, and sustainability of earth observation in space business: Tensions and paradoxes. Paper presented at the Advances in Digital Marketing and eCommerce: Third International Conference, 2022.
  45. Lahiri, A., Cormican, K., & Sampaio, S. (2021). Design thinking: From products to projects. Procedia computer science, 181, 141-148.
  46. Lahti, H., Kangas, K., Härkki, T., & Seitamaa-Hakkarainen, P. (2022). Challenging creativity constraints: Three design studios in craft teacher education. Techne serien-Forskning i slöjdpedagogik och slöjdvetenskap, 29(1), 1-12.
  47. Laptev, G., & Shaytan, D. (2022). Co-design-based learning for entrepreneurs in the digital age. Measuring Business Excellence, 26(1), 93-105.
  48. Lauff, C. A., Knight, D., Kotys-Schwartz, D., & Rentschler, M. E. (2020). The role of prototypes in communication between stakeholders. Design Studies, 66, 1-34.
  49. Lawson, B. (2006). How designers think: The design process demystified: Routledge.
  50. Leon, R.-D. (2021). Intellectual capital and the coronavirus crisis: taking a closer look at restaurants’ strategies. Knowledge Management Research & Practice, 19(4), 501-509.
  51. Li, W., Bhutto, T. A., Xuhui, W., Maitlo, Q., Zafar, A. U., & Bhutto, N. A. (2020). Unlocking employees’ green creativity: The effects of green transformational leadership, green intrinsic, and extrinsic motivation. Journal of cleaner production, 255, 120229.
  52. Lichtenthaler, U. (2020). A conceptual framework for combining agile and structured innovation processes. Research-Technology Management, 63(5), 42-48.
  53. Liu, S. X., Liu, H., & Zhang, Y. (2018). The new role of design in innovation: A policy perspective from China. The Design Journal, 21(1), 37-58.
  54. Loderer, M., & Kock, A. (2021). The influence of design thinking on open innovation. International Journal of Innovation Management, 25(10), 2140001.
  55. Lundberg, H., & Öberg, C. (2021). Teachers, researchers, but not innovators? Rethinking university-industry collaboration. Journal of Business & Industrial Marketing, 36(13), 161-173.
  56. Lybæk, R., Christensen, T. B., & Thomsen, T. P. (2021). Enhancing policies for deployment of Industrial symbiosis–What are the obstacles, drivers and future way forward? Journal of cleaner production, 280, 124351.
  57. Lyu, C., Zhang, F., Ji, J., Teo, T. S., Wang, T., & Liu, Z. (2022). Competitive intensity and new product development outcomes: The roles of knowledge integration and organizational unlearning. Journal of Business Research, 139, 121-133.
  58. Magistretti, S., Ardito, L., & Messeni Petruzzelli, A. (2021). Framing the microfoundations of design thinking as a dynamic capability for innovation: Reconciling theory and practice. Journal of Product innovation management, 38(6), 645-667.
  59. Magistretti, S., Bianchi, M., Calabretta, G., Candi, M., Dell’Era, C., Stigliani, I., & Verganti, R. (2022). Framing the multifaceted nature of design thinking in addressing different innovation purposes. Long range planning, 55(5), 102163.
  60. Manna, V., Rombach, M., Dean, D., & Rennie, H. G. (2022). A design thinking approach to teaching sustainability. Journal of Marketing Education, 44(3), 362-374.
  61. Mansur, M., & Djaelani, A. K. (2023). Business Strategy Approach to Informal Small Businesses in Increasing Productivity and Competitiveness. Golden Ratio of Marketing and Applied Psychology of Business, 3(1), 01-19.
  62. Manzke, J. (2022). Competitive advantage and business sustainability through design thinking within manufacturing SMEs: an integrative literature review. International Journal of Competitiveness, 2(3), 248-265.
  63. Marx, C. (2022). Design Thinking for Digital Transformation: Reconciling Theory and Practice Design Thinking Research: Achieving Real Innovation (pp. 57-77): Springer.
  64. McNally, J. J., Piperopoulos, P., Welsh, D. H., Mengel, T., Tantawy, M., & Papageorgiadis, N. (2020). From pedagogy to andragogy: Assessing the impact of social entrepreneurship course syllabi on the Millennial learner. Journal of small business management, 58(5), 871-892.
  65. Meinel, M., Eismann, T. T., Baccarella, C. V., Fixson, S. K., & Voigt, K.-I. (2020). Does applying design thinking result in better new product concepts than a traditional innovation approach? An experimental comparison study. European Management Journal, 38(4), 661-671.
  66. Micheli, P., Wilner, S. J., Bhatti, S. H., Mura, M., & Beverland, M. B. (2019). Doing design thinking: Conceptual review, synthesis, and research agenda. Journal of Product innovation management, 36(2), 124-148.
  67. Mikalef, P., Pateli, A., & van de Wetering, R. (2021). IT architecture flexibility and IT governance decentralisation as drivers of IT-enabled dynamic capabilities and competitive performance: The moderating effect of the external environment. European Journal of Information Systems, 30(5), 512-540.
  68. Nagaraj, V., Berente, N., Lyytinen, K., & Gaskin, J. (2020). Team design thinking, product innovativeness, and the moderating role of problem unfamiliarity. Journal of Product innovation management, 37(4), 297-323.
  69. Nakata, C. (2020). Design thinking for innovation: Considering distinctions, fit, and use in firms. Business horizons, 63(6), 763-772.
  70. Nakata, C., & Hwang, J. (2020). Design thinking for innovation: Composition, consequence, and contingency. Journal of Business Research, 118, 117-128.
  71. Neri, A., Cagno, E., Lepri, M., & Trianni, A. (2021). A triple bottom line balanced set of key performance indicators to measure the sustainability performance of industrial supply chains. Sustainable Production and Consumption, 26, 648-691.
  72. Nguyen, A. H., Hoang, T. G., Nguyen, L. Q. T., & Thi Pham, H. M. (2022). Design thinking-based Data Analytic Lifecycle for improving management control in banks. Technology Analysis & Strategic Management, 1-16.
  73. Niesten, E., & Stefan, I. (2019). Embracing the paradox of interorganizational value co?creation–value capture: A literature review towards paradox resolution. International Journal of Management Reviews, 21(2), 231-255.
  74. Nowell, L. S., Norris, J. M., White, D. E., & Moules, N. J. (2017). Thematic analysis: Striving to meet the trustworthiness criteria. International journal of qualitative methods, 16(1), 1609406917733847.
  75. Nylund, P. A., Brem, A., & Agarwal, N. (2021). Innovation ecosystems for meeting sustainable development goals: The evolving roles of multinational enterprises. Journal of cleaner production, 281, 125329.
  76. Omwami, A., Lahti, H., & Seitamaa-Hakkarainen, P. (2020). The variation of the idea development process in apparel design: a multiple case study. International Journal of Fashion Design, Technology and Education, 13(3), 341-351.
  77. Ordieres-Meré, J., Prieto Remon, T., & Rubio, J. (2020). Digitalization: An opportunity for contributing to sustainability from knowledge creation. Sustainability, 12(4), 1460.
  78. Parizi, R., Prestes, M., Marczak, S., & Conte, T. (2022). How has design thinking being used and integrated into software development activities? A systematic mapping. Journal of Systems and Software, 187, 111217.
  79. Petersen, K., Vakkalanka, S., & Kuzniarz, L. (2015). Guidelines for conducting systematic mapping studies in software engineering: An update. Information and software technology, 64, 1-18.
  80. Qiu, X., Cano-Kollmann, M., & Mudambi, R. (2022). Generating tacit knowledge across borders: international collaboration and design innovation in Norway. Industry and Innovation, 29(5), 597-622.
  81. Randhawa, K., Nikolova, N., Ahuja, S., & Schweitzer, J. (2021). Design thinking implementation for innovation: An organization's journey to ambidexterity. Journal of Product innovation management, 38(6), 668-700.
  82. Ravanello, I., Wolff, F., & Capra, A. (2017). Design Absorption And Learning Processes: a study on designers’ perceptions about companies. The Design Journal, 20(sup1), S2616-S2624.
  83. Robbins, P., & Fu, N. (2022). Blind faith or hard evidence? Exploring the indirect performance impact of design thinking practices in R&D. R&D Management, 52(4), 704-719.
  84. Roth, K., Globocnik, D., Rau, C., & Neyer, A. K. (2020). Living up to the expectations: The effect of design thinking on project success. Creativity and innovation management, 29(4), 667-684.
  85. Rudke, C. R. M., Zielinski, A. A. F., & Ferreira, S. R. S. (2023). From biorefinery to food product design: Peach (Prunus persica) by-products deserve attention. Food and Bioprocess Technology, 16(6), 1197-1215.
  86. Rylander Eklund, A., Navarro Aguiar, U., & Amacker, A. (2022). Design thinking as sensemaking: Developing a pragmatist theory of practice to (re) introduce sensibility. Journal of Product innovation management, 39(1), 24-43.
  87. Sameti, A., Koslow, S., & Mashhady, A. (2022). Are product design researchers and practitioners on the same page? The way professional product designers view creative design. Journal of Product & Brand Management, 31(6), 951-970.
  88. Seidel, V. P., Marion, T. J., & Fixson, S. K. (2020). Innovating how to learn design thinking, making, and innovation: Incorporating multiple modes in teaching the innovation process. INFORMS Transactions on Education, 20(2), 73-84.
  89. Silva, D. S., Ghezzi, A., Aguiar, R. B. d., Cortimiglia, M. N., & ten Caten, C. S. (2020). Lean Startup, Agile Methodologies and Customer Development for business model innovation: A systematic review and research agenda. International Journal of Entrepreneurial Behavior & Research, 26(4), 595-628.
  90. Singh, V., & Thurman, A. (2019). How many ways can we define online learning? A systematic literature review of definitions of online learning (1988-2018). American Journal of Distance Education, 33(4), 289-306.
  91. Stickdorn, M., Hormess, M. E., Lawrence, A., & Schneider, J. (2018). This is service design doing: applying service design thinking in the real world: " O'Reilly Media, Inc.".
  92. Suresh, V., & Kolluru, M. (2022). Pedagogy innovation for management graduates: application of design thinking. International Journal of Innovation Science, 14(3/4), 659-674.
  93. Trischler, J., Dietrich, T., & Rundle-Thiele, S. (2019). Co-design: from expert-to user-driven ideas in public service design. Public management review, 21(11), 1595-1619.
  94. Ünal, E., Urbinati, A., Chiaroni, D., & Manzini, R. (2019). Value Creation in Circular Business Models: The case of a US small medium enterprise in the building sector. Resources, conservation and recycling, 146, 291-307.
  95. Veflen, N., & Gonera, A. (2023). Perceived usefulness of design thinking activities for transforming research to impact. Food Control, 143, 109264.
  96. Velu, S. R. (2022). Design Thinking Approach for Increasing Innovative Action in Universities: ICT’s Mediating Effect. Sustainability, 15(1), 24.
  97. Yang, C., Zhang, L., & Wei, W. (2022). The influence of introducing the concept of sustainable system design thinking on consumer cognition: A designer’s perspective. Systems, 10(4), 85.
  98. Yang, M., Fu, M., & Zhang, Z. (2021). The adoption of digital technologies in supply chains: Drivers, process and impact. Technological Forecasting and Social Change, 169, 120795.
  99. Zhang, F., Sun, S., Liu, C., & Chang, V. (2020). Consumer innovativeness, product innovation and smart toys. Electronic Commerce Research and Applications, 41, 100974.
  100. Zhang, J., Yu, Q., Zheng, F., Long, C., Lu, Z., & Duan, Z. (2016). Comparing keywords plus of WOS and author keywords: A case study of patient adherence research. Journal of the association for information science and technology, 67(4), 967-972.
  101. Zheng, L. J., Xiong, C., Chen, X., & Li, C.-S. (2021). Product innovation in entrepreneurial firms: How business model design influences disruptive and adoptive innovation. Technological Forecasting and Social Change, 170, 120894.
  102. Zidulka, A. (2016). Weaving Together Creative Problem-Solving and Design Thinking in an MBA Class. Designing Business and Management, 197-207.
  103. Zonta, T., Da Costa, C. A., da Rosa Righi, R., de Lima, M. J., da Trindade, E. S., & Li, G. P. (2020). Predictive maintenance in the Industry 4.0: A systematic literature review. Computers & Industrial Engineering, 150, 106889.